+ 0, - 0.075mm Cold Roll Steel Square Bar 1018 Metric Cold Finish Over 6mm to 10mm, incl. For more information about our Products and Services, please Contact Us or view our Product Manual. It also has higher mechanical properties and better machinability due to the cold drawing process. It is extensively used for mounting plates, spacers and fixtures. + 0, - 0.110mm Cold Roll Steel Square Bar 1018 … It is highly suitable for carburized parts, such as gears, ratchets, worms, pinions, pins, chain pins, dowels, machine parts, non-critical components of tool and die sets, tool holders, etc. The cold working of the bar likewise improves machinability, usually rated at 76. C1018, available in rounds, flats, squares and hexagons, has a relatively large size selection. For severe bends, stress relieving may be necessary to prevent cracking. A member of the Reliance family of companies, Carbon AISI/SAE 1018 COLD FINISHED (UNS G10180), Carbon AISI/SAE 1018 COLD FINISHED The cold working of the bar likewise improves machinability, usually rated at 76. Preheat and post-weld heating is generally not necessary. C1018 is suitable for all applications that do not require the greater strength of high carbon and alloy steels. It is used when good workability is required, on parts requiring threading, drilling, punching and machining. *Width governs the tolerances for both width and thickness of flats. Most cold finished bars are produced by cold drawing oversize hot rolled bars through a die. 1018 has a wide variety of applications. Cold finished product is manufactured in conformance to ASTM A108, All forms of shafting and machinery parts. Carburize at 1650°-1700°, oil or water quench and temper at 300°. For a hard case and tough core, the following heat treatment is suggested: Carburize at 1650°-1700°F for approximately 8 hours, cool in oven and reheat to 1400°-1450°F. (UNS G10180), Most cold finished bars are produced by cold drawing oversize hot rolled bars through a die. Due to size limitations of the cold drawing process, large diameter bars are generally turned and polished, the hot roll rounds usually machine turned, rather than drawn, then abrasively polished. Larger bars are often produced by turning and polishing only. The cold reduction of the bar results in significantly improved mechanical properties, with a smooth surface finish to close tolerances. The cold reduction of the bar results in significantly improved mechanical properties, with a smooth surface finish to close tolerances. For example, for a flat 1 x 2", the width and thickness tolerance is +.000" / -.005", 1/8" {A} x 1/4" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 5/16" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 3/8" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 1/2" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 5/8" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 3/4" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 7/8" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 1/8" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 1/4" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 3/8" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 1/2" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 5/8" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 3/4" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 3/16" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 5/16" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 3/8" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 1/2" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 5/8" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 3/4" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 7/8" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 1-3/8" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 3-1/4" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 3-3/4" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 5-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 7" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 1/4" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 1/2" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 5/8" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 3/4" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 7" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 5/16" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 7/16" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 1/2" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 5/8" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 3/4" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 7/8" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 1-3/8" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 3-1/4" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 3-3/4" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 5-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 7" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 9" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 3/8" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 7/16" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 7/16" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 7/16" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 7/16" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 7/16" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 5/8" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 3/4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 7/8" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 1-3/8" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 1-5/8" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 3-1/4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 3-3/4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 4-1/4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 4-3/4" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 5-1/2" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 7" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 9" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 11" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 1/2" {A} x 14-5/8" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 3/4" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 7/8" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 1-5/8" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 3-1/4" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 7" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 5/8" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 7/8" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 1-1/8" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 1-3/8" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 3-1/4" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 3-3/4" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 5-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 6-1/2" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 7" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 9" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 11" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 3/4" {A} x 14-5/8" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 1" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 1-3/8" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 7/8" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 1-1/8" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 1-1/4" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 1-3/8" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 1-5/8" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 5-1/2" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 6-1/2" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 7" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 9" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 1" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 1-1/8" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/8" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/8" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1-1/8" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/8" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1-1/8" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 3-1/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 3-3/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 5-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 1-1/4" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 1-3/8" {A} x 1-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-3/8" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1-3/8" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 1-3/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 3-1/4" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 5-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 1-1/2" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 1-5/8" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1-5/8" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 2" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 3-3/4" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 5-1/2" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 1-3/4" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 2-1/4" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 2" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 2-1/4" {A} x 2-1/2" {B} 1018 Steel Flat, Cold Finishe, 2-1/4" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 2-1/4" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 2-1/4" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 2-1/4" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 2-1/4" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 2-3/4" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 3" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 2-1/2" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 3" {A} x 3-1/2" {B} 1018 Steel Flat, Cold Finishe, 3" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 3" {A} x 4-1/2" {B} 1018 Steel Flat, Cold Finishe, 3" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 3" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 3" {A} x 7" {B} 1018 Steel Flat, Cold Finishe, 3" {A} x 8" {B} 1018 Steel Flat, Cold Finishe, 3" {A} x 10" {B} 1018 Steel Flat, Cold Finishe, 3" {A} x 12" {B} 1018 Steel Flat, Cold Finishe, 3-1/2" {A} x 4" {B} 1018 Steel Flat, Cold Finishe, 3-1/2" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 3-1/2" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 4" {A} x 5" {B} 1018 Steel Flat, Cold Finishe, 4" {A} x 6" {B} 1018 Steel Flat, Cold Finishe, 4-1/2" {A} x 5" {B} 1018 Steel Flat, Cold Finishe.